Bold = Default Setting
COMMUNICATION SETTINGS
Section #
[140] ___/___ REPORTING FORMATS
TEL1 TEL2 1 = ADEMCO SLOW (1400HZ, 1900HZ, 10BPS)
2 = SILENT KNIGHT FAST (1400HZ, 1900HZ, 20BPS)
3 = SESCOA (2300HZ, 1800HZ, 20BPS)
4 = ADEMCO EXPRESS (DTMF 4+2)
5 = ADEMCO CONTACT ID (DEFAULT) ALSO, SEE OPTION [3] IN SECTION [136]
6 = PAGER FORMAT
[141] ___/___/___/___ PANEL IDENTIFIER (WINLOAD SOFTWARE)
[142] ___/___/___/___ PC PASSWORD (WINLOAD SOFTWARE)
IMPORTANT NOTE: To enter account numbers with less than four digits, use the [FORCE] key to enter blank digits.
[143] ___/___/___/___ PARTITION ACCOUNT NUMBER 1
[144] ___/___/___/___ PARTITION ACCOUNT NUMBER 2
[150] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
PC TELEPHONE NUMBER FOR WINLOAD SOFTWARE (32-DIGITS, if less than 32 press [ENTER] to accept)
[151] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
CENTRAL STATION TELEPHONE OR PAGER NUMBER 1 (32-DIGITS, if less than 32 press [ENTER] to accept)
[152] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
CENTRAL STATION TELEPHONE OR PAGER NUMBER 2 (32-DIGITS, if less than 32 press [ENTER] to accept)
[153] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
BACK UP TELEPHONE NUMBER (32-DIGITS, if less than 32 press [ENTER] to accept)
SECTION [138]: Event Call Direction
Option OFF ON
[1] Call Telephone #1 for Trouble/Restore Report Codes l Disabled l Enabled
[2] Call Telephone #2 for Trouble/Restore Report Codes l Disabled l Enabled
[3] Call Telephone #1 for Special Report Codes l Disabled l Enabled
[4] Call Telephone #2 for Special Report Codes l Disabled l Enabled
[5] Future Use l N/A l N/A
[6] Future Use l N/A l N/A
[7] Future Use l N/A l N/A
[8] Future Use l N/A l N/A
Special Keys for Telephone Numbers
[STAY] = * [MEM] = Switch from pulse to tone dialing or vice versa [FORCE] = Delete current digit
[BYP] = # [TBL] or [TRBL] = 4-second pause [PG] or [FNC1] = Inserts Blank Space
To Next Page
Loading...
Need help?
General
