Page 24
The Menu Structure
890CD
The main menus for the 890CD are shown below. Each menu contains parameters.
NOTE Refer to the Engineering Reference Manual for a list of available parameters.
OPERATOR
menu at level 1
DIAGNOSTICS
menu at level 1
QUICK SETUP
menu at level 1
SETUP
menu at level 1
SYSTEM
menu at level 1
AC MOTOR DRIVE
15kW 400V 1.x
DOWN arrow to get to the SETUP menu -
contains all the parameters
DOWN arrow to get to the SYSTEM menu
DOWN arrow to get to the DIAGNOSTICS menu
DOWN arrow to get to the QUICK SETUP menu
This is the power-up welcome screen. If a different screen
appears, press E a few times to return to this screen.
Press the M key to get to the OPERATOR menu
To Next Page
Loading...
