Page 3
Safety
IMPORTANT
Please read this information BEFORE installing the equipment.
Hazards to Personnel
WARNING
This equipment can endanger life through rotating machinery and high voltages. Failure
to observe the following will constitute an ELECTRICAL SHOCK HAZARD.
Metal parts may reach a temperature of 70 degrees Centigrade in operation.
Before working on the equipment, ensure isolation of the mains supply from terminals
L1, L2 and L3. The equipment contains high value capacitors which discharge slowly after
removal of the mains supply. Wait for at least 3 minutes for the dc link terminals (DC+ and
DC-) to discharge to safe voltage levels (<50V). Measure the DC+ and DC- terminal
voltage with a meter to confirm that the voltage is less than 50V.
Do not apply external voltage sources (mains supply or otherwise) to any of the braking
terminals (DBR+, DBR-, DC+, INT or EXT).
Application Risk
The specifications, processes and circuitry described herein are for guidance only
and may need to be adapted to the user's specific application.
Parker SSD Drives does not guarantee the suitability of the equipment described in
the Manual for individual applications.
This manual is for anyone
installing, operating and
servicing this unit.
To Next Page
Loading...
