Parker AC30 series Product Manual

16
AC30 series General Purpose I/O Option
Specification
Thermistor resistance range
0 to 4.5kΩ
Resistance measurement
accuracy
5%
Thermistor compatibility
PTC, NTC, KTY
Default = PTC
Measurement supply voltage
1.3V @ 1kΩ
Motor temperature threshold
Resistance threshold set by user.
Default = 1kΩ.
Motor temperature reset
threshold
Resistance based on temperature
threshold. Default = 50% of trip
threshold.
Update rate
1 second
Insulation
Reinforced insulation between
thermistor terminals and drive
electronics.
Important safety information:
Insulation and routing of wiring to the GPIO thermistor terminals must be
appropriately rated to ensure the correct degree of insulation to other user
wiring.
Example Application
X22/01
X22/02
Motor
Thermistor

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485