Parker AC30 series Product Manual

21
AC30 series General Purpose I/O Option
Environmental
Restriction, Evaluation, Authorisation and
Restriction of Chemicals (REACH)
The Regulation (EC) No 1907/2006 of the European Parliament and of
the Council of 18 December 2006 concerning the Registration,
Evaluation, Authorization, and Restriction of Chemicals (REACH) entered
into force on June 1, 2007. Parker agrees with the purpose of REACH
which is to ensure a high level of protection of human health and the
environment. Parker is compliant with all applicable requirements of
REACH.
The registration requirements do not apply to Parker since it is neither a
manufacturer nor an importer of preparations into Europe.
However, product (article) manufacturers or importers into Europe are
obligated under Article 33 of REACH to inform recipients of any articles
that contain chemicals on the Substances of Very High Concern (SVHC)
candidate list above a 0.1% concentration (by weight per article). As of
19
th
December 2011 VSD products manufactured and marketed by
Parker do not contain substances on the REACH SVHC candidate list in
concentrations greater than 0.1% by weight per article. Parker will
continue to monitor the developments of the REACH legislation and will
communicate with our customers according to the requirement above.
WARNING
Restriction of Hazardous Substances (RoHS)
This product is in full compliance with RoHS Directive 2011/65/EU, with
respect to the following substances:
1) Lead (Pb),
2) Mercury (Hg),
3) Cadmium (Cd),
4) Hexavalent chromium (Cr (VI)),
5) Polybrominated biphenyls (PBB),
6) Polybrominated diphenyl ethers (PBDE).

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485