Parker AC30 - Connecting to the Ethernet IP Network; Cable Type

4
AC30 EtherNet IP Option
Connecting to the EtherNet IP Network
Two RJ45 Ethernet sockets are provided. Either or both sockets may
be used. Having 2 ports reduces the need for additional Ethernet
switches.
The socket shields are connected to protective
earth via a filter.
Cable Type
CAT5E or CAT6 cable up to 100m between nodes
with both RJ45 plugs wired in the same TIA/EIA-
468A or B scheme.
LEDs
EtherNet/IP
NS
MS
Network Status Module Status