Parker AC30 - Ethernet; Web Server

20
AC30 EtherNet IP Option
Ethernet
Web Server
The option has a built-in web server enabling some configuration and
diagnostics for the option.
To enable the web server the parameter 0203 Option Web Enable
must be set to TRUE. The web pages may be accessed by a web
browser by entering the IP address of the option.
A number of built-in pages are available. The main index page
provides a link to the Network Interface pages and the Parameter
Data pages.
Network Interface Pages
The Network Interface page provides basic information about the
option.
The Network Configuration page allows TCP/IP settings to be
changed. The Host name can also be set here. This will be used if
DHCP is enabled.
The Network Statics page provides information about the Ethernet
ports and communications statistics.
Parameter Data Pages
The Parameter Data pages allow access to some AC30 parameters.
To enable access to this page the parameter 0204 Web Parameters
Enable must be set to TRUE.