13
AC30 EtherNet IP Option
Configuring the AC30
AC30 Parker Drive Quicktool (PDQ)
When performing an online configuration, the fitted option card will
automatically be selected. In offline mode, parameter 0044 Comms
required must be set to Ethernet IP
In the Application tab, the following settings are available in the
Communications block.
Select the method to set the IP address, subnet mask and gateway
address using the 0199 Address Assignment parameter:
If this parameter is set to FIXED then the parameters 0200 Fixed IP
Address, 0201 Fixed Subnet Mask, 0202 Fixed Gateway Address
must be set:
To Next Page
Loading...
