Parker AC30 - Diagnostic Parameters

29
AC30 EtherNet IP Option
Diagnostic Parameters
0045 Comms Fitted
Range
Type
USINT
(enumerated)
(0) UNKNOWN
(1) NONE
(2) BACNET IP
(3) BACNET MSTP
(4) CANOPEN
(5) CC LINK
(6) CONTROLNET
(7) DEVICENET
(8) ETHERCAT
(9) ETHERNET IP
(10) MODBUS RTU
(11) MODBUS TCP
(12) PROFIBUS DPV1
(13) PROFINET IO
Communications option parameter.
Indicates the communications option
fitted.
0046 Comms State
Range
Type
USINT
(enumerated)
(0) SETUP – setup in progress
(1) NW INIT – network-related initialisation
tasks are being performed
(2) WAIT PROCESS – the module will stay in
this state until a Class 1 connection is
opened
(3) IDLE – Class 1 connection idle
(4) PROCESS ACTIVE – Error free Class 1
connection
(5) ERROR – Class 1 connection error, or
duplicate IP address detected
(6) RESERVED
(7) EXCEPTION – major fault
(8) NONE – option not fitted
Communications option parameter.
Indicates the state of the
communications option fitted.