Parker AC30 - Example Using allen Bradley Rslogix 5000

10
AC30 EtherNet IP Option
Example Using Allen Bradley RSLogix 5000
Prior knowledge of the Allen Bradley RSLogix 5000 software is
assumed. The following is an example of configuring the PLC.
1. Start a new project and select the required PLC processor and
chassis type.
In this example, a 1756-L55 processor and 1756-A7 rack is chosen.
2. Insert the Ethernet interface.
Right-click on the I/O Configuration and select New Module. In this
example, a 1756-ENBT/A is used.