Parker AC30 - Page 39

30
AC30 EtherNet IP Option
0225 EtherNet IP State
Range
Type
USINT
(enumerated)
(0) SETUP – setup in progress
(1) NW INIT – network-related initialisation
tasks are being performed
(2) WAITING TO CONNECT – the module will
stay in this state until a Class 1 connection
is opened
(3) CONNECTION IDLE – Class 1 connection
idle
(4) CONNECTION ACTIVE – Error free Class
1 connection
(5) ERROR – Class 1 connection error, or
duplicate IP address detected
(6) RESERVED
(7) EXCEPTION – major fault
(8) NONE – option not fitted
Ethernet IP communications option
parameter.
Indicates the state of the
communications option fitted as the
parameter 0046 Comms State, but
using specific enumerated strings for
EtherNet IP.
0189 Option MAC Address
Range
Type
STRING
Null terminated string.
Communications option parameter.
Indicates the Ethernet MAC address
of the option.
0195 Option IP Address
Range
Type
DWORD
(IP address)
0.0.0.0
…
255.255.255.255
Communications option parameter.
Indicates the current IP address of
the slave.