12
AC30 EtherNet IP Option
Enter the required name and IP address. The Input Assembly
Instance is 100 (64h), the Output Assembly Instance is 150 (96h)
and the Configuration Assembly Instance is 5.
The data size is 6 bytes in either direction to match the
configuration of the AC30 in this example.
4. Save and Download.
When completed with the setup, the project may be saved and
downloaded to the PLC. For testing, the data can be accessed
via the Controller Tags.
Note that if other tools, such as RSNetworx, are used to configure
the PLC then, rather than using a generic device, an EDS file is
available and may be downloaded from www.parker.com/ssd
To Next Page
Loading...
