Parker ac890 - Page 310

Keypad Menus 10-8
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
The DIAGNOSTIC Menu
DIAGNOSTIC MENU
890CD Common Bus Drive & 890SD Standalone Drive
PREF
6511 Display
6901 Display
101.09
SPEED DEMAND
Range: —.xx %
Indicates actual speed demand. This is the input to the frequency controller.
(Refer to the REFERENCE function block)
101.01
REMOTE SETPOINT
Range: —.xx %
This is the target reference that the drive will ramp to in remote reference mode (not including trim), direction is
taken from REFERENCE::REMOTE REVERSE and the sign of REMOTE SETPOINT.
(Refer to the REFERENCE function block)
101.14
COMMS SETPOINT
Range: —.xx %
This setpoint is the target reference that the drive will ramp to in Remote Reference Comms mode (not including
trim). The direction is always positive, i.e. forward.
(Refer to the REFERENCE function block)
101.12
LOCAL SETPOINT
Range: —.xx %
Indicates the Keypad setpoint. It is always a positive quantity; saved on power down. Direction is taken from
LOCAL REVERSE.
(Refer to the REFERENCE function block)
103.01
(JOG) SETPOINT
Range: —.xx %
The setpoint is the target reference that the drive will ramp to in Jog Reference mode.
(Refer to the REFERENCE JOG function block)