To Next Page

To Previous Page

Programming D-52

890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D

Parameter Descriptions

POSITION OUTPUT

PREF: 119.06

Default: —.xxxx deg

Range: —.xxxx deg

This diagnostic shows the position demand in load mechanical degrees.

SPEED OUTPUT

PREF: 119.07

Default: —.xx Hz

Range: —.xx Hz

This diagnostic shows the speed demand in load mechanical Hz (rev/s).

ACCEL OUTPUT

PREF: 119.08

Default: —.xx

Range: —.xx

This diagnostic shows the acceleration demand in load mechanical Hz/s (rev/s

MASTER POSITION

PREF: 119.09

Default: —.xxxx deg

Range: —.xxxx deg

This diagnostic shows the master aster position demand in mechanical degrees.

MASTER SPEED

PREF: 119.10

Default: —.xxxx Hz

Range: —.xxxx Hz

This diagnostic shows the master speed demand in mechanical Hz (rev/s).

MASTER ACCEL

PREF: 119.11

Default: —.xxxx

Range: —.xxxx

This diagnostic shows the master acceleration demand in mechanical Hz/s (rev/s

READY

PREF: 119.14

Default: FALSE

Range: FALSE / TRUE

This diagnostic is TRUE when local drive is properly synchronised with the master, i.e. Status = READY.

Parker ac890 User Manual

Other manuals for Parker ac890