Parker ac890 - Page 469

D-73 Programming
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
Parameter Descriptions
POWER UP MODE
PREF: 94.03
Default: 1
Range: See below
Allows the power-up operating mode of the Drive to be selected. Local is the Keypad, Remote is an external signal, Automatic
is the same mode as at power-down. The modes supported are:
Enumerated Value : Power Up Mode
0 : LOCAL
1 : REMOTE
2 : AUTOMATIC
SEQ DIRECTION
PREF: 94.04
Default:
FALSE
Range: FALSE / TRUE
When TRUE, direction is a Sequencing command.
When FALSE, direction is a Reference command.
REMOTE SEQ
PREF: 94.05
Default: TRUE
Range: FALSE / TRUE
This parameter indicates the present source of the sequencing commands.
REMOTE REF
PREF: 94.06
Default: TRUE
Range: FALSE / TRUE
This parameter indicates the present source of the reference signal.