To Next Page

To Previous Page

Programming D-128

890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D

REFERENCE JOG

SETUP::SEQ & REF::REFERENCE JOG

This block holds all the parameters that concern the Jog functionality on the Drive.

Parameter Descriptions

SETPOINT

PREF: 103.01

Default: 10.00 %

Range: -100.00 to 100.00 %

The setpoint is the target reference that the Drive will ramp to.

ACCEL TIME

PREF: 103.02

Default: 1.0 s

Range: 0.0 to 3000.0 s

The time that the Drive will take to ramp the jog setpoint from 0.00% to 100.00%.

DECEL TIME

PREF: 103.03

Default: 1.0 s

Range: 0.0 to 3000.0 s

The time that the Drive will take to ramp the jog setpoint from 100.00% to 0.00%.

Functional Description

The REFERENCE JOG function block is used to configure the action of the Drive when used in jog mode. The various

operating modes are described in more detail in Chapter 4 or 5: - The Start/Stop Mode Explained.

Parker ac890 User Manual

Other manuals for Parker ac890