Parker ac890 - Page 81

4-59 890CS & 890CD Common Bus Units
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
11
B
M
time-out
E
M
M
E
x 2
M
10.0 %
SETPOINT (LOCAL)

R
L
10.0 %
SETPOINT (LOCAL)

E
menu at level 1
x 2
Routine 2: Remote Mode
This routine assumes that the drive’s control terminals are wired as shown in "Control Connection
Diagram" on page 4-23.
IMPORTANT Ensure that the speed potentiometer is set to zero.
On the 890CD Common Bus Drive:
1. The drive should be "healthy" now it is powered-up: no flashing trip messages displayed, and the 6901
keypad's HEALTH LED is lit (the RUN LED remains off).
If the drive has tripped, the keypad will be flashing a trip message, and the 6901 keypad's HEALTH