EasyManua.ls Logo

Parker ac890 - Page 87

Parker ac890
711 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-5 890SD Standalone Drive
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
11
B
D
890 Operating Conditions
Humidity
Maximum 85% relative humidity at 40°C (104°F) non-condensing
Altitude If greater than 1000m above sea level, derate by 1% per 100m to a
maximum of 2000m
Atmosphere Non flammable, non corrosive and dust free
Climatic Conditions Class 3k3, as defined by EN50178.
Vibration The product has been tested to the following specification:
Test Fc of EN60068-2-6
10Hz<=f<=57Hz sinusoidal 0.075mm amplitude
57Hz<=f<=150Hz sinusoidal 1g
10 sweep cycles per axis on each of three mutually perpendicular axis
Safety
Pollution Degree
Pollution Degree ll (non-conductive pollution, except for temporary
condensation)
Europe When fitted inside an enclosure, this product conforms with the Low
Voltage Directive 2006/95/EC using EN50178 to show compliance.
North America/ Canada Complies with the requirements of UL508C as an open-type drive.
Conformal Coated
Product
Conformal coating increases the product’s resistance to certain
climatic conditions.
Note conformal coating, where effective, will only mitigate the effects
being considered.

Table of Contents

Other manuals for Parker ac890

Related product manuals