Parker GVI Series - 8.10 Motor temperature measurement input

Parker EME
Motor temperature measurement input
37 192-300300N1 GVI Frames C, D & E 2019-9
8.9.3. Circuit
Figure 23 Schematic of the High side Switch
8.10 Motor temperature measurement input
8.10.1. Function
Motor temperature sensor input for measurement of the motor winding temperature. The input is optimized
for temperature sensors KTY84 with 1 000 Ω @ 100 °C, see chapter 7.14.
8.10.2. Protection
The input is B+ protected. Input capacitors provide ESD protection and filtering of signal.
8.10.3. Circuit
Figure 24 Schematic of the MOTOR_TEMP input circuit