Safety signs on the equipment
9 192-300300N1 GVI Frames C, D & E 2019-9
Take care to avoid coming into contact with electricity.
Read the product manual before starting any maintenance work on
the equipment.
Persons with active implanted cardiac devices shall not be in the
vicinity of the equipment due to the strong electromagnetic field it
generates.
Tighten the power connection screws to the specified tightening
torque (example shown).
Table 1 Safety signs used on Parker’s equipment
3. Original Equipment
Manufacturer responsibility
The Parker inverter products are intended for controlling motors in electric powered vehicles. These inverters
are supplied to original equipment manufacturers (OEMs) for incorporation into their vehicles and vehicle
control systems.
OEMs are responsible for ensuring that the GVI inverter is used for its intended purpose only.
It is the OEM’s responsibility to ensure that their equipment
• functions in a safe way
• complies with applicable regulations
4. Technical support
Parker support original equipment manufacturers (OEM’s) with additional information on any topic covered in
this document, or for additional information about other Parker products. End customers and third parties are
requested to turn to the OEM for support.
To Next Page
Loading...
