Parker HAS Series - Page 81

Parker Hannifin Corporation
Cylinder Division
Des Plaines, Illinois
www.parker.com/cylinder
Hydraulic and Electrohydraulic Actuators
HAS Series Analog Drives Manual
Catalog HY08-4005-M3
82
WARNING: This product can expose you to chemicals including Lead and Lead Compounds which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
PROP 65 WARNING
Diagnostic Menu
DDIIAAGGNNOOSSTTIICC MMEENNUU
PPRREEFF 66551111 DDiissppllaayy 66990011 DDiissppllaayy
78.21 DDIIRREECCTT IINNPPUUTT
RRaannggee:: —.xx %
The value of the direct input, after scaling and clamping.
(Refer to the SPEED LOOP function block)
78.16 TTOORRQQ DDMMDD IISSOOLLAATTEE
RRaannggee: FALSE / TRUE
Speed Control mode and Torque Control mode selection. Torque Control mode = TRUE.
(Refer to the SPEED LOOP function block)
83.05 AACCTTUUAALL PPOOSS LLIIMM
RRaannggee:: —.xx %
The final actual positive torque limit as a percentage of rated motor torque.
(Refer to the TORQUE LIMIT function block)
83.06 AACCTTUUAALL NNEEGG LLIIMM
RRaannggee:: —.xx %
The final actual negative torque limit as a percentage of rated motor torque.
(Refer to the TORQUE LIMIT function block)
78.07
AAUUXX TTOORRQQUUEE DDMMDD
RRaannggee:: —.xx %
The auxiliary motor torque as a percentage of rated motor torque as a percentage of rated motor torque.
(Refer to the SPEED LOOP function block)
78.20 TTOORRQQUUEE DDEEMMAANNDD
RRaannggee:: —.xx %
The demanded motor torque as a percentage of rated motor torque.
(Refer to the SPEED LOOP function block)
85
wwwwww..ppaarrkkeerr..ccoomm/
cylinder