Parker HAS Series - Page 82

Hydraulic and Electrohydraulic Actuators
HAS Series Analog Drives Manual
83
Parker Hannifin Corporation
Cylinder Division
Des Plaines, Illinois USA
www.parker.com/cylinder
Catalog HY08-4005-M3
WARNING: This product can expose you to chemicals including Lead and Lead Compounds which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
PROP 65 WARNING
Diagnostic Menu
DDIIAAGGNNOOSSTTIICC MMEENNUU
PPRREEFF 66551111 DDiissppllaayy 66990011 DDiissppllaayy
70.10 TTOORRQQUUEE FFEEEEDDBBAACCKK
RRaannggee:: —.xx %
The estimated motor torque, as a percentage of rated motor torque.
(Refer to the FEEDBACKS function block)
70.11 FFIIEELLDD FFEEEEDDBBAACCKK
RRaannggee:: —.xx %
A value of 100% indicates the motor is operating at rated magnetic flux (field).
(Refer to the FEEDBACKS function block)
70.12 MMOOTTOORR CCUURRRREENNTT %%
RRaannggee:: —.xx %
This diagnostic contains the level of rms line current being drawn from the drive and is seen
as a % of the MOTOR CURRENT parameter setting in the MOTOR INDUCTION function
block.
(Refer to the FEEDBACKS function block)
70.13 MMOOTTOORR CCUURRRREENNTT AA
RRaannggee:: —.xx A
This diagnostic contains the level of rms line current being drawn from the drive.
(Refer to the FEEDBACKS function block)
70.02 DDCC LLIINNKK VVOOLLTTSS
RRaannggee:: —.xx V
The internal dc voltage tested across the DC link capacitors.
(Refer to the FEEDBACKS function block)
70.03 TTEERRMMIINNAALL VVOOLLTTSS
RRaannggee:: —.xx V
This shows the rms voltage, between phases, applied by the drive to the motor terminals.
(Refer to the FEEDBACKS function block)
86
wwwwww..ppaarrkkeerr..ccoomm/
cylinder