Music from an audio player connected via the Jack / Jack cable
Using the Car spatialization function
The Car spatialization function allows you to obtain a sound rendering in three
dimensions. To use this function, select Settings > AudioFX > Car spatialization.
You can choose among 4 position settings : for the driver's seat, the passenger's seat,
the front seats or all the seats in the car.
If you select the driver's or the passenger's seat,
you can move the slider to move the audio sound
to your right or to your left.
If you select the front seats, the direct sounds are
automatically placed in the center, between the
two seats.
If you select all the seats in the car, the direct
sounds are automatically placed in the center of
the car.
Using the Virtual Super Bass 2 effect
The Virtual Super Bass 2 effect amplifies bass frequencies psychoacoustically.
To activate or deactivate the Virtual Super Bass 2
effect, select Settings > AudioFX and check the Virtual
Super Bass 2 box.
Move the slider to reach the cut off frequency and the
effect intensity desired.
The setting Cutoff frequency allows you to select the
bass cutoff frequency for the speakers (the lowest
frequency that the speakers can generate naturally).
The Virtual Super Bass will reproduce the frequencies
that are lower than this cutoff frequency.
The setting Effect intensity allows you to adjust the level of bass frequencies
generated by the Virtual Super Bass 2 effect.
Using the equalizer
The equalizer allows you to adjust low, medium and high frequencies to your
preferences. To use the equalizer, select Settings > AudioFX > Equalizer.
To activate or deactivate the equalizer, select Settings
To Next Page
Loading...
