8200w² Monitor Instruction Manual
11 Technical Specification
11.1 Physical
Dimensions ....................................213 x 185 x 95mm (HxWxD)
Enclosure Material..........................Polycarbonate (PC)
Weight.............................................1.4Kg
Temperature....................................-20 to +60
C, 0-95% Relative Humidity, Non-Condensing
Mounting.........................................Wall or Rail Mounting Bracket or Enclosure Option Available
Cable Entries...................................1x M20, 4x M16, 1x M12
11.2 User Interface
Display ...........................................Graphic LCD, Black on White, Transreflective
Viewing Area...................................78 x 59mm
Backlight..........................................Always ON / OFF, User Adjustable ON/OFF after key press
Membrane Keypad..........................High quality 6 key membrane with Pillow Embossed 20mm dia Buttons
11.3 Electrical
Operation Voltage: .........................100 to 240VAC, 50/60Hz
or 12 to 24VDC
Power Rating...................................0.8A AC, 30W DC (Power consumption may increase for 2 or more sensors)
Terminal Wire Size..........................Max 2.5mm² cores
Digital/Relay Outputs......................3 (Reduced to 1 Relay for PROFIBUS)
Relay Type......................................SPCO, Max 230VAC Switching Voltage
Relay Rating....................................Max 5A @ 30VDC / 230VAC
Auxiliary Connections......................Configurable for remote Input, Output or 12VDC Aux Power
11.4 Sensors and Optional Interfaces
Sensor Communication...................ModTechw² Protocol (Specifically developed for w² range of sensors)
ModTechw² Cable Specification......2 Twisted Pair (Red/Black, Green/White), 24AWG screened with drain wire
229844IM Issue 01 Issue Date 24/06/2019 ` Page 31 of 34
To Next Page
Loading...