Partner PT-5910 - Load Failsafe Defaults

26 CHAPTER 2 BIOS SETUP
Load Failsafe Defaults
This option opens a dialog box that lets you load fail-safe defaults for all appropriate items in the Setup
Utility. The fail-safe defaults place no great demands on the system and are generally stable. If the system
is not functioning correctly, try loading the fail-safe defaults as a rst step in getting the system working
properly again. If you only want to load fail-safe defaults for a specic option, select and display that option,
and then press <F8>.
Follow these instructions: to load the fail-safe defaults:
1. From the Exit screen, scroll to Load Failsafe Defaults.
2. Press <Enter> to open the Load Setup Failsafe Defaults screen.
3. Select <Ok>.
4. Press <Enter> to load the defaults.