PAW FC3.10 - Hot Water; Functions

8 Hot water
24 99E13331xx-mub-en - V08 2022/07
8 Hot water
NOMINAL TEMPERATURE
60 °C
MIN : 35
MAX : 75
In this menu item, you can make the temperature settings
for the hot water preparation.
Setting options for the following parameters are available:
• Nominal temperature: the set hot water temperature which is supposed to be reached at
the outlet of the domestic hot water module
• Minimal temperature*: the lower limit for the setting of the hot water temperature
• Maximal temperature*: the upper limit for the setting of the hot water nominal
temperature
Parameters
Meaning
Adjustment range
Factory setting
Nominal
temperature
Hot water nominal temperature 35...75 °C 60 °C
Minimum
temperature*
Minimum hot water nominal
temperature
20...45 °C 35 °C
Maximum
temperature*
Maximum hot water nominal
temperature
60...90 °C 75 °C
*Settings only visible with installer code (see chapter "User code").
9 Functions
This menu item contains all selectable functions as well as the corresponding settings. To
activate/deactivate the desired functions, press the
Confirm button. Then, the corresponding
submenu opens. By pressing again the
Confirm button, you can activate/deactivate the
functions.
FUNCTIONS
Circulation
Stratification return
Modulating hot water tempe
Comfort functions
In the example, the ticked check box indicates that the
function
Circulation was activated.