2 Safety instructions
8 99E13331xx-mub-en - V08 2022/07
2 Safety instructions
The installation and commissioning as well as the connection of electrical components require
technical knowledge commensurate with a recognised vocational qualification as a fitter for
plumbing, heating and air conditioning technology, or a profession requiring a comparable level
of knowledge [specialist].
The following must be observed during installation and commissioning:
• relevant local and national regulations
• accident prevention regulations of the professional association
• instructions and safety instructions mentioned in these instructions
Personal injury and damage to property!
The controller must only be used in domestic hot water modules.
The domestic hot water module can be damaged by improper operation of
the device. The device must not be connected to the mains power supply
when:
the body is open or damaged.
cables are damaged.
This document is part of the product. Install and use the device only after having read
and understood this document. Please observe all safety instructions. Please contact
an additional expert if uncertainties occur.
The measures described in this document may only be carried out by qualified technical
professionals.
Factory labels and markings must never be modified, removed or rendered unreadable.
Observe the prescribed operating conditions. For more information, see the section
Technical data.
This device is not intended for:
• Children
• Persons with restricted physical, sensory or mental capacities
• Persons without sufficient experience or knowledge
unless they are instructed in the use of the device, and initially supervised, by a person
responsible for their safety.
To Next Page
Loading...
