PAW FC3.10 - General Settings; Language; Date; Time

10 General settings
2022/07 99E13331xx-mub-en - V08 25
The following functions are available:
• Circulation
• Stratification return
• Modulating hot water temperature
• Comfort function
• Disinfection
• Alarm relay
• Parallel relay
• Hygienic flush
• Buffer tank*
• - Reheating*
Detailed information in chapter
Description of function.
*Settings only visible with installer code (see chapter "User code").
10 General settings
In this menu, you can make all basic settings of the controller as well as update/modify settings
of the commissioning. The menu is structured as follows:
10.1 Language
Set the desired language (see "Commissioning")
10.2 Date
Set the current date. First set the day, the month and finally the year.
10.3 Time
Set the current time. First set the hour, then the minutes.
10.4 Synchronise date/time
Activate/deactivate the synchronisation of date and time. The synchronisation is only possible in
connection with an internet module.
10.5 Automatic Daylight saving time / Standard time
Activate/deactivate the automatic daylight saving time / standard time
When the controller is delivered, this menu item is activated.