1 General Information
2022/07 99E13331xx-mub-en - V08 7
1 General Information
1.1 Scope of these instructions
These instructions describe the function, installation and commissioning of the DHW controller
FC3.10. The chapters called [specialist] are intended for specialists only.
For further components external of the module, such as valves, please follow the instructions of
the respective manufacturer.
1.2 Designated use
The domestic hot water controller, subsequently referred to as the
controller
, is an
independently installed electronic temperature controller for on-surface installation.
The maintenance-free controller is exclusively intended for the controlling and monitoring of a
PAW domestic hot water module. Improper usage of the controller excludes any liability claims.
Only use PAW accessories with the controller.
The packaging materials are made of recyclable materials and can be disposed of with
recyclable materials.
This product complies with the relevant directives and is therefore labelled with the CE mark.
The Declaration of Conformity is available upon request, please contact the manufacturer.
1.3 Target group
The target audience of this manual are technical professionals who:
• have the knowledge of terminology and the skills necessary for setting up and
operating domestic hot water modules.
• have the necessary professional training, knowledge and experience as well
as the knowledge of the relevant regulations, in order to evaluate the following
work and to detect potential dangers:
– Installation of electrical devices
– Assembly and connection of data lines
– Assembly and connection of power supply lines.
Carefully read these instructions before installation and commissioning.
Save these instructions in the vicinity of the installation for future reference.
To Next Page
Loading...
