PAW FC3.10 - Internet Module; Registration

11 Internet module
2022/07 99E13331xx-mub-en - V08 27
Contrast Setting the contrast -15 … 15 0
colour inversion Setting the colour
inversion
Yes, No Yes
Screen lock Activate the screen
lock
Yes, No No
Screen lock after Setting the delay 1 … 10 min 2 minutes
11 Internet module
Via the WiFi / Internet module, the domestic hot water module can be addressed externally.
For this, a wireless network / WLAN is required to connect the module via the Internet module.
Important: For this, the port 2000 must be activated. At the moment, the following possibilities
are available:
- Data logging inclusive analysis possibilities via the web service
- Remote maintenance
- Parameter / function modification
- Synchronisation of the time with the Internet
Additional instructions are enclosed to the Internet module. The following data can be
additionally set in the domestic hot water controller FC3.10:
11.1 Registration
The registration is required to retrieve data of the domestic hot water module via the Internet
and to make settings. With the registration, the module is assigned to a user within the web
service.