PAW FC3.10 - Format Data Carrier; Properties; Automatic;Manual Mode

14 Automatic/manual mode
30 99E13331xx-mub-en - V08 2022/07
13.8 Format data carrier
Formats the USB flash drive. All data will be deleted on the USB flash drive.
13.9 Properties
Displays the capacity and the free memory on the USB flash drive.
Parameters
Meaning
Adjustment range
Factory setting
Remove data carrier Safe removal of the
USB flash drive
- -
Load settings Load the controller
settings
- -
Save settings Save the controller
settings
- -
Save alarm history Save the alarm
history
- -
Save parameter
history
Save the parameter
history
- -
Data logging interval Setting the data
logging interval
1 ... 60 s 1 s
Recording type Setting the recording
type
Linear, cyclical Linear
Format data carrier Formatting the USB
flash drive
- -
Properties Properties of the
USB flash drive
- -
14 Automatic/manual mode
In this menu item, you can set the operation mode of all used PWM outputs and relays in the
controller as well as a sensor simulation.
With the sensor simulation, a certain temperature can be set for a sensor in order to simulate this
temperature. In addition, a certain offset parameter for the automatic mode for all sensors can be
set with the menu item "Calibration".