EasyManua.ls Logo

PAX E800 - 6 TERMINAL LOCATION; 7 PAPER ROLL; 7.1 DIMENSIONS; 7.2 LOAD PAPER

PAX E800
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
support@pax.us
(877) 859-0099
www.pax.us
20190426 v1.0
E800 REFERENCE GUIDE
5 Ports
The E800 has ports that enable the terminal to add peripherals such as PIN pads, check readers,
contactless readers, other external devices, to enable local terminal downloads and communications,
and to provide power. These ports are located under the back cover and on the right side of the E800.
5.1 Ports Under Back Cover
The following ports are available under the back cover:
Power Used to connect the power supply to the E800
WAN (RJ45 Ethernet) – Used to connect to the internet
LAN A and LAN B (RJ45 Ethernet)Used for bi-directional Ethernet connections using DSL or
Ethernet cable
Audio Jack (3.5mm)Allows the hearing impaired to connect an assistive listening device to the
terminal
Cash Drawer (RJ11, 24V) Used to connect to the cash drawer
RS232 (DB9 Male) Used to connect to an external POS device or check reader
USB-OTG (Type C Connector)Used for local terminals downloads or external peripherals
USB-A Host, USB-B Host, USB-C Host, USB-D Host (Type C Connector)Used to connect
different USB devices such as a USB drive, USB keyboard, or mouse. The E800 host acts as a
controller and the peripheral, such as a USB drive, responds to its commands.
Ports

Table of Contents

Related product manuals