PAX E800 - Manual Static IP

41
E800 REFERENCE GUIDE
Customer Support
support@pax.us
(877) 859-0099
www.pax.us
20190426 v1.0
Manual Static IP
If the broadcast SSID is disabled on an access point, the terminal will not display the SSID under available
Wi-Fi network listings. In this case, it is necessary to manually configure the terminal for Static IP
connection types.
To set up a manual static proxy:
1. From the Main Menu, select Settings.
Settings on Main Menu
2. If a password is required, enter the password, press the green check mark () button, and press
OK.
3. Select Wi-Fi.
Wi-Fi Icon