9. System information
You can view software version and hardware version information.
XII. Instrument Care and Maintenance
1. Routine precautions
Any instrument is concerned, the correct use is the best safeguard for equipment maintenance, with emphasis on
the use of the environment and mobile devices, in addition to the requirements previously proposed for use, we
must also pay attention to the following issues:
1) Use the environment clean, the host instrument when not in use can be used to cover up the cloth cover to
prevent dust accumulation, the thermostat should be placed in long-term storage of dry indoor better,
2) The sample is placed over the pool should pay attention to the color being careful not to let the solution spilled
into the sample chamber, to prevent corrosion, for some volatile sample, we recommend using the cuvette lid to
prevent the impact of volatile gases to light , thus affecting the accuracy of the test equipment,
3) Any optical instrument road section screws and nuts, are not going to loose, to prevent the optical path
deviations affect the instrument is working properly,
4) The instrument must not mirror all the hard and soft hands or objects to touch, once leaving traces, will produce
stray light and reduce the effective energy punish and even cause damage to man-made instruments,
5) Instrument handling should be handled with care, can not be placed on the instrument shell weight, so as to
avoid affecting the optical path shift stability and accuracy,
6) The instrument can not work in bright light to ensure the accuracy of measurements,
7) Instrument power do not always do wavelength calibration, but can not always do, wavelength calibration is
recommended once a week in order to improve the accuracy of the measured data,
8) The instrument can not be left unused for a long time, so instead of reducing life, if not for some time, it is
recommended boot 1-2 times a week, each about half an hour.
To Next Page
Loading...
Need help?
General
