3. Time and date settings
Set the time and date of the instrument, set the year, month, day, hour, minute, second. By the arrow keys to select
the year, month, day, hour, minute, second, through the numeric keys currently selected content. Press Enter to
confirm your entry, press Esc to abandon input.
Note: The time and date after the instrument is switched off, will not power down lost.
4. Light source management
Of deuterium lamps and tungsten light source light switches to control the display of each light source life.
Up and down keys to select the source, press Enter to confirm the selection, the arrow keys to select the state of
the light source, and press Enter to confirm the selection,
Note: Open deuterium lamp need preheating after 15 seconds, before they can open
To Next Page
Loading...
Need help?
General
