Pearpoint Flexitrax P550c - Reporting Settings

P550c Operation Manual
5 System setup
www.pearpoint.com | 111
 Sonde frequency: Your tractor includes an on-board sonde. Use this menu to select the frequency that
the sonde transmits or to turn the sonde off. You can also use the panel button to cycle through the sonde
frequencies, see page 148.
 Reel type: Select the reel type you are using from the dropdown list.
It is essential that you select the correct reel, for best video quality and accurate distance
measurements. If you select the wrong reel, pushrod distance measurements will be inaccurate and
your survey may be unusable.
 Reel power off/on: Use this setting to turn the reel camera off or on.
Note: If the battery level is low on your controller, turn off the camera to save battery power.
Reporting settings
The P550c can help you create reports which conform exactly to the reporting standard you chose when
creating a survey.
 Enforce mandatory fields: When you select this option the P550c will report an error if you leave a
mandatory field blank. (Correct the error so that you can continue.)
 Validate format of entered data: When you select this option, the P550c will report an error if you fill in a
field in the incorrect format. (Correct the error so that you can continue.)