ECP300 EXPERT
Pag. 22
USE AND MAINTENANCE MANUAL
ECP300 EXPERT PANEL FUNCTIONS
- Signaling with LED icons of the plant status.
- Electronic control with wide LED display and easy to use buttons.
- Display and adjustment of cold room temperature accurate to 0.1 °C.
- Display of evaporator temperature from parameter.
- System control activation/deactivation.
- Alarm signaling: probe errors, minimum and maximum temperature alarm, compressor
protection (man in cold room alarm in preset models).
- Evaporator fans control.
- Automatic and manual defrost control (static, heating element).
- Direct or pump-down control of motor compressor unit (selectable by terminal block
connection in preset models).
- Room light activation, via panel key or door switch
- Auxiliary relay with activation configurable by parameter.
- RS485 for connection to TeleNET industrial supervision network.
- Paramet access with Password (4 different selectable restriction levels).
- General magnetothermic circuit breaker accessible from the front panel, which cuts the
general power supply.
- Adjustable motor circuit breaker for compressor protection accessible from the front panel
(in preset models).
- Differential magnetothermic Id=30mA dedicated to room light accessible from the front
panel (in preset models).
CHAP. 4 - Functions
To Next Page
Loading...
Need help?
General
