Pego ECP300 EXPERT VD Series User Manual

ECP300 EXPERT
Pag. 25
USE AND MAINTENANCE MANUAL
Rev. 01-12
GENERAL
To enhance safety and simplify the operator’s work, the ECP300 EXPERT has two
programming levels; the first level (Level 1) is used to configure the frequently-modified
SETPOINT parameters. The second programming level (Level 2) is for general parameter
programming of the various controller work.
It is not possible to access the Level 2 programming directly from Level 1: you must exit the
programming mode first.
KEY TO SYMBOLS
For purposes of practicality the following symbols are used:
• (t) the UP key is used to increase values and mute the alarm.
• (u) the DOWN key is used to decrease values and force defrosting.
SETTING AND DISPLAYING THE SET POINTS
1. Press the SET key to display the current SETPOINT (temperature)
2. Hold down the SET key and press the (t) or (u) keys to modify the SETPOINT.
Release the SET key to return to cold room temperature display: the new setting will be saved
automatically.
CHAP. 5 - Data programming
5.4
5.5
5.6

Pego ECP300 EXPERT VD Series Specifications

General

Brand	Pego
Model	ECP300 EXPERT VD Series
Category	Control Panel
Language	English