ECP300 EXPERT
Pag. 31
USE AND MAINTENANCE MANUAL
Rev. 01-12
PUMP DOWN FUNCTION
Selection of PUMP DOWN functioning mode for the compressor working on X1 terminal block,
changing the selection connection as indicated in the wiring diagram.
AU parameter must never be set up on 4, because PUMP DOWN function is made
electromechanically inside the panel.
PASSWORD FUNCTION
When parameter PA is setting with value different to 0 the protection function is activated.
See parameter P1 for the different protection.
When PA is setting the protection start after two minutes of inactivity. On display appear 000.
With up/down modify the number, with set key confirm it.
Use universal number 100 if you don’t remember the password.
CHAP. 5 - Data programming
To Next Page
Loading...
Need help?
General
