Pego ECP300 EXPERT VD Series User Manual

ECP300 EXPERT
Pag. 26
USE AND MAINTENANCE MANUAL
Rev. 0
1
-
12
LEVEL 1 PROGRAMMING (User Level)
To gain access to the Level 1 configuration menu proceed as follows:
1. Press the (t) and (u) keys simultaneously and keep them pressed for a few seconds until
the first programming variable appears on the display.
2. Release the (t) and (u) keys.
3. Select the variable to be modified using the (t) or (u) key.
4. When the variable has been selected it is possible:
• to display the setting by pressing SET key
• to modify the setting by pressing the SET key together with the (t) or (u) key.
When configuration values have been set you can exit the menu by pressing the (t) and (u)
keys simultaneously for a few seconds until the cold room temperature reappears.
5. The new settings are saved automatically when you exit the configuration menu.
CHAP. 5 - Data programming
5.7

Pego ECP300 EXPERT VD Series Specifications

General

Brand	Pego
Model	ECP300 EXPERT VD Series
Category	Control Panel
Language	English