EasyManua.ls Logo

Pelpro PP60 - High Ash Fuel Content Maintenance

Pelpro PP60
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7083-171H • February 23, 2015 www.pelprostoves.com16
D. High Ash Fuel Content Maintenance
• Frequency: As needed
• By: Homeowner
Conditions that make the repot ll quickly with ashes
and clinkers require higher maintenance for the appliance
include:
· Poor quality pellet fuel.
· Lack of maintenance.
· Trim Dial is set to a less than optimum setting.
This condition makes the appliance susceptible to over lling
the repot with pellets which may result in smoking, soot-
ing and possible hopper res. The gure below shows an
example where the repot over lls, pellets back up into the
feed tube and ash has accumulated in the rebox.
An inef cient and non-economical method of burning of fuel
caused by poor quality pellet fuel
is shown below.
If the ash buildup exceeds the half way point in the repot
IMMEDIATE ATTENTION AND CLEANING IS REQUIRED.
Incorrect Flame Height
Tall, Lazy Flame
Orange in Color
Pellets Back-up in Feed Tube
Ash build-up in Firebox
Firepot Overfills

Table of Contents

Other manuals for Pelpro PP60

Related product manuals