Need help?Do you have a question about the Pendix eDrive and is the answer not in the manual?
General| Type | Mid-drive motor |
|---|---|
| Mounting position | Bottom bracket |
| Voltage | 36 V |
| Battery Voltage | 36 V |
| Compatibility | Various bicycle frames |
| Motor Type | Brushless |
| Max Speed | 25 km/h (EU) |
Explains the meaning of symbols used in the manual for warnings and information.
Details potential residual risks after Pendix eDrive installation and usage.
Essential safety precautions and guidelines for performing the installation.
Checks and prerequisites for the bicycle frame before starting installation.
Lists and describes the special tools needed for mounting Pendix components.
Instructions for attaching the wheel speed sensor and magnet to the bicycle wheel.
Steps for installing the electronic bottom bracket unit into the bicycle frame.
Guidance on securely attaching the battery holder to the bicycle frame.
Detailed instructions for mounting the eMachine unit onto the bottom bracket.
How to connect the wheel speed sensor and electronic bottom bracket cables to the motor.
Steps for attaching the chain wheels and the crank arm to the bicycle.
Checklist for inspecting bicycle components before installing the Pendix eDrive.
Checklist for verifying Pendix installation requirements and frame compatibility.
Checklist item for ensuring the battery is not inserted during installation.
Checklist section for ensuring all installed components move freely after installation.
Checklist items specific to commercial installers for documentation and customer handover.
To Next Page
