Pentair COLOR SYNC - Page 25

24
25
Color Sync Controller Pentair Home app User's Guide
3. Pairing and Connecting to Your WiFi Home Network
1. Dashboard: After login: Tap Add a Device (water drop icon)
then tap Color Sync to add this device to your smart device.
Turn on Bluetooth on your smart device.
2. Color Sync Controller Dial/Button: Press and hold the DIAL
for 10-seconds until the WiFi Blue light is solid and all the
other Controller White lights are also solid. Color Sync is
ready for Bluetooth® wireless technology paring.
3. Installation (Color Sync) screen displays (1 of 4): Tap
CONTINUE. The Bluetooth® wireless technology paring
screen displays. If pairing is successful the “Bluetooth
Wireless Connection Established” screen displays. Tap
CONTINUE. The Connect Your Device to WiFi screen
displays.
4. Connect Your Device to WiFi (2.4 GHz Router) (screen 3 of
4): Tap the name (SSID) of your home network and enter the
password. Tap CONTINUE to connect to your home network.
5. Color Sync (screen 4 of 4): The Color Sync address screen
displays. Select your address from the device address drop
down menu and press CONTINUE. If needed, you can add
another location.
6. Tap CONTINUE. The nickname used for the Color Sync app
is displayed. If needed, you can change the name. Tap SAVE
when nished.
7. Installation Completed screen displays. Tap CONTINUE.
The Set Up Your Pool screen displays. Enter the pool
specications. Continue to Add a Device.
4. Add a Device
1. My Devices: Tap the Product Device name to display the Add
Devices page.
2. Add Devices: Tap the device name (Color Sync) to connect
the selected device. The Dashboard displays.