HAFFMANS RPU 352, RPU 353, RPC 80 RPC 50
2
RPU 352, RPU 353, RPC 80, RPC 50 Page 31 of 112
10 FULL LIST
Shows a list of all the data in the recorded file.
*
10.1 TIME LINE MOVEMENT
Four records from a file can be shown in detail on the screen. The “time line”
shows the position of these records in relation to the whole file. The two switches
below the screen are used to move the time line. Moving the line to the right
shows records nearer to the end of the file.
The line moves by one record as soon as you operate the switch. If you hold the
switch for a short time then the line starts to move continuously, slowly at first and
then faster, for as long as the switch is held. When the line reaches the last
record in the file the switch outline becomes dim and it no longer has any effect.
Moving the line to the left (towards the start of the file) works in a similar way.
The time line is not shown for very short files (under 1 minute).
An inactive channel gives a blank column with an X in the header.
Display backlight
You can use the top left switch at any time to turn on the display backlight.
*
The illustration shows the list in °C and bar. The details change according to the display units selected.
Elapsed time from
start of file
Move line
to right
“Time line”
shows position in file
Move line
to left
Return to
File ID number
ONLY FOR
PRU-353
To Next Page
Loading...
