HAFFMANS RPU 352, RPU 353, RPC 80 RPC 50
2
RPU 352, RPU 353, RPC 80, RPC 50 Page 61 of 112
21 USE
Warning
Read this chapter carefully before using the RPC-80. The RPC-80 is not
waterproof.
21.1 SWITCHING ON
Switch on the mains switch of the RPC-80. The display will light up and briefly show time and
date. The Canon printer must be switched on, don't try to start printing until the "on line" lamp is
lit steadily. Always check that there is enough paper in the Canon printer before starting to use
the RPC-80.
21.2 CONNECTING THE MONITOR
The RPC-80 will now be showing
"TRYING TO COMMUNICATE WITH MONITOR..."
Connect a monitor that has some files recorded in it, use the same lead to connect to the new
2OO series and the older 100 series monitors. For connections see fig 5.1.
ATTENTION
!
If the P.U. monitor has two sockets, use socket number 1.
Fig 21.1 RPC-80 connections
Ha
ff
mans-REDPOST RPC-80
Mains Power In
On /OFF
Data to printer
DC power to
printer
monitor
To Next Page
Loading...
