HAFFMANS RPU 352, RPU 353, RPC 80 RPC 50
2
RPU 352, RPU 353, RPC 80, RPC 50 Page 35 of 112
12 MENUS
There are stages in the operation and configuration of the instrument when you
need to choose an action etc. from a menu list. A menu shows all the possible
choices or items in a vertical list. The method of operation is the same in every
case although there can be as few as 2 and as many as 6 items in the menu list.
12.1 MOVING THE HIGHLIGHT
The two switches below the screen are used to move the highlight over the item
in the list that you wish to select.
The highlight moves down by one item as soon as you operate the right hand
switch. If you hold the switch for a short time then the highlight starts to move
down continuously for as long as the switch is held. When the highlight reaches
the bottom item the switch outline becomes dim and it no longer has any effect.
Moving the highlight up with the left switch works in a similar way.
12.2 SELECTING AN ITEM
Operate the top right (OK) switch to select the item you have highlighted.
Example
Select highlighted
Move highlight
up
Move highlight
Highlighted
item
Select French
language
To Next Page
Loading...
