Pentair iCHLOR - Plumbing Procedure

6
English
iCHLOR Plumbing Diagram
Plumbing the iCHLOR Salt Chlorinator:
• Always install the iCHLOR Salt Chlorinator AFTER the lter and heater. The iCHLOR should be no closer than 1m away
from the heater outlet.
• If the iCHLOR is installed on a pool/spa combinaon system, install (see diagram below) the iCHLOR BEFORE the pool/
spa return valve to allow proper chlorinaon of both the pool and spa and also to avoid creang gas traps in the pipes.
NOT TO SCALE
Note: For best ow, provide
at least 30 to 45cm of straight
pipe in front of the cell inlet.