174
6
Appendix
Default Settings
The table below lists the factory default settings.
Table notations are as follows.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is turned
off.
No : The setting returns to the default setting when the camera is turned off.
Reset Setting
Yes : The setting returns to the default setting with the reset function (p.171).
No : The setting is saved even after reset.
[A Rec. Mode] Menu
[Q Playback] Menu
* Only the slimness and softness settings for the slim filter and soft filter are saved.
Item Default Setting
Last
Memory
Setting
Reset
Setting
Page
Image Tone
F
(Bright) Yes Yes p.108
Recorded Pixels
P
(3008×2000) Yes Yes p.109
Quality Level C (Best) Yes Yes p.110
Saturation (0) Yes Yes p.111
Sharpness (0) Yes Yes p.111
Contrast (0) Yes Yes p.111
Instant Review 1 sec Yes Yes p.170
Auto Bracket ±0.5/0-+ Yes Yes p.145
AE Metering L
(Multi-segment) Yes Yes p.130
Focusing Area N (Wide) Yes Yes p.121
AF Mode
l
(Single mode)
Yes Yes p.122
Flash Exp. Comp.
0.0
Yes Yes p.146
Item Default Setting
Last
Memory
Setting
Reset
Setting
Page
Plybk dsply mthd Image only Yes Yes p.160
Bright Portion Off Yes Yes p.160
Digital Filter B&W Yes* Yes p.71
Slideshow 3 sec Yes Yes p.68
To Next Page
Loading...
Need help?
General
