28
2
Getting Started
We recommend using the AC adapter D-AC10 (optional) when using the
LCD monitor for a long time or when connecting to your PC.
1
Make sure the camera is turned off before opening the
terminal cover.
2
Connect the DC terminal on the AC adapter to the DC input
terminal on the camera.
3
Connect the AC plug cord to the AC adapter.
4
Plug the AC cord into the power outlet.
Using the AC Adapter (Optional)
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the camera, AC adapter, AC
plug cord terminal and the power outlet. SD Memory Card and data will be
corrupted if disconnected while camera is recording or reading data.
• Be sure to read the AC adapter D-AC10 operating manual when using the
AC adapter.
• The rechargeable batteries in your camera will not charge when connected
to the AC adapter.
1
2
3
4
To Next Page
Loading...
Need help?
General
