EasyManua.ls Logo

Pentax ist ist DL - Page 193

Pentax ist ist DL
208 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
191
6
Appendix
Exposure mode
e Program, b Shutter priority, c Aperture priority, a Manual,
p Bulb
Picture mode I Auto Picture, U Normal, = Portrait,
s Landscape, q Macro, \ Moving Object,
. Night Scene Portrait, a Flash OFF
Shutter
Electronically controlled vertical-run focal-plane shutter,
Electromagnetic release, Speed range (1) Auto 1/4000-30 sec.
(step less), (2) Manual 1/4000-30 sec. [1/2 EV step or 1/3 EV step]
(3) Bulb, Shutter lock by setting Main switch in OFF position.
Lens Mount
Pentax KAF bayonet mount (K-mount with AF coupler, lens
information contacts)
Lens used
Pentax K
AF2 (not power zoom compatible), KAF mount lenses, KA
mount lenses
Autofocus System
TTL phase-matching autofocus system (SAFOX VIII), AF
operational brightness range: EV –1 to 18 (at ISO 100 with f/1.4
lens), Focus lock available, Focus Mode: l (Single)/k
(Continuous)/\, Switch Focusing Area (Wide/Spot) available
Viewfinder
Penta-mirror viewfinder, Natural-Bright-Matte II focusing screen,
Field of view: 95%, Magnification 0.85× (with 50 mm f/1.4 lens at
), Diopter: –2.5m
-1
to +1.5m
-1
. (per meter)
Viewfinder Indication
Focus information: ] is lit when in-focus and blinking when
unable to focus, b is lit=Built-in flash ready, Blinking=Flash
should be used or incompatible lens is being used, Shutter
speed, Aperture value, e-dial enabled indicator, @=AE lock,
Capacity remaining and m=Exposure compensation,
K=Manual white balance, k=Continuous mode, Picture
mode icon, \=Manual focus, o=ISO warning
LCD Panel display
b
is lit=Built-in flash ready, Blinking=Flash should be used or
incompatible lens is being used,
E
=Auto discharge,
E>
=Redeye reduct Auto discharge,
9
=Single frame shooting,
j
=Continuous shooting,
g
=Self-timer,
h
=Remote control
shooting,
?
=Battery exhaustion warning,
]
=Auto bracketing
exposure (exposure setting steps can be set to 1/2EV or 1/3EV),
M
=Center-weighted metering,
N
=Spot metering,
M
=Spot AF,
Shutter speed, Aperture value, White Balance, Capacity remaining
and
m
=Exposure compensation,
PC
(mass storage)/
Pb
(PictBridge) appears when the USB cable is connected.
Depth of Field
confirmation
Electronically controlled and usable in all exposure modes
Self-timer
Electronically controlled with delay time of 12 sec./2 sec. (with
mirror lock up). Start by pressing shutter release button.
Operation confirmation: Possible to set beep. Can be cancelled
after operation
Mirror
Quick-return mirror, mirror lock up function (available at 2 sec.
self-timer)
Auto Bracket
Three frames continuous shots with exposure bracketing
(Selectable between 1/2EV and 1/3EV for Exposure setting steps)

Table of Contents

Related product manuals